Henry P Lading

Henry P. Lading


Henry P. Lading is a Cable Transport & Laying Barge well suited for installation and repair of flexible pipes and subsea cables. The vessel can operate both in shallow water areas as well offshore locations. The turntable has a loading capacity of 1800 ton and can be supplemented by both coil tanks, drum stands and a 150-ton turntable. Furthermore, the barge is equipped with an A-frame of 40 ton and 6 warp winches.
Download brochureSee our gallery |
![]() |
Datasheet
Information | Principal dimensions | |||||||
Type of Barge | Cable Laying Barge | Length over all | 81,71 m | |||||
Owner | JD Crafts A/S | Breath moulded | 21,30 m | |||||
Operator | JD-Contractor A/S | Summer draught | 3,24 m | |||||
Air draught | 22,00 m | |||||||
Gross Tonnage | 1922 ton | |||||||
Accommodation | 26 (9 crew, 17 pax) | |||||||
Deck equipment | When required the vessel can be equipped with: | |||||||
Anchors | 6 x Warping Winch for 6 point mooring | Complete diving systems with treatment and decompression chamber | ||||||
A-Frame | SWL 40 t, height over main deck 12 m | Caterpillar pull/push: 30/15 t, 800mm | ||||||
ROVs and embedding systems that can be controlled from the vessel | ||||||||
Repair and splicing equipment for submarine cables | ||||||||
Coil tanks, drum stands and small turntables |